Cleaning information for fittings and showers

Here are our care and maintenance instructions, designed to keep your Kludi fitting looking as good as new.

Clean the parts regularly to prevent the accumulation of dirt and lime-scale.

For daily cleaning please use neutral cleaner and water. Use cleaners on citric acid base only to get off strong lime.

Use cleaning agents specially developed for fittings. Observe the instructions given with the cleaning agent.

Cleaning sprays should be sprayed onto the cloth used for cleaning. Not directly onto the fitting.

The used dosage of the cleaning agent and the time to work in must be adapted to the level of dirt. Never let the cleaning agent work in longer than necessary.

Rinse the fittings with sufficient water and polish them with a soft cloth. Never use:

• ...abrasive cleaning materials or pads,
• ...cleaning agents with light, volatile acids such as hydrochloric acid or acetic acid,
• ...scouring powders or abrasive cleaning fluids,
• ...cleaning agents containing chlorine bleach.

Also note: Cleaning the fittings after use helps retain their value.

Cleaning of hand-held and overhead showers

KLUDI overhead and hand-held showers should be checked regularly for limescale. Limescale builds up mostly on and in the elastomer dimpling of the jet. KLUDI uses materials that hinder limescale deposit so that any build-up can be easily removed by simply wiping the showerhead with a sponge or cloth. We accept no liability for damage caused to our overhead and hand-held showers as a result of failure to follow these cleaning instructions.